Parts made with the APSX-PIM

.
Click on the pictures below to see the details (dimesions and weight information)

Please be aware that all of these parts that you see above do not have specific surface finish requirements via secondary polishing procedures. The molds are as is out of cnc machining. The end results can be better if you perform polishing on the mold you make.

If you have a part designed for injection molding, you can use the APSX-PIM. The parameters you need to look for are:

1 – Max shot size (30 cu-cm) – that means “about” 30 gr of plastic Your part and the sprue-runners-gates total should not be more than 25 cu-cm for a reliable continuous process

2 – The part footprint should not exceed 10-12 sq-in on the standard APSX-PIM mold (6” X 4.8”)

If these two are ok, you can use the APSX-PIM.

Please read all the lines under the FAQ tab here: https://apsx.com/desktop-injection-molding-machine

Please also read all the pages under APSX-PIM support pages: https://apsx.com/injection-molding-support 

. 

Send us your questions via email ([email protected]) so that we can reply you properly. 

Please include ALL OF THE FOLLOWINGS:

- Your name and last name

- Phone number

- Company Name and website (if applicable)

- Part drawing as STEP file